This is a great studded tire option for your winter 29er. 400 Carbide studs give you long lasting, maximum traction for icy conditions.
Origin-8's Alloy Blade Chainrings are CNC-machined out of tough, light and durable 6061-T6 aluminum and are compatible with 8- and 9-speed drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition. - Fits many older Shimano pre-Hollowtech II cranksets with Octalink V2 or square spindle bottom brackets - Middle chainrings from Octalink (Hollowtech I) and square spindle cranksets are not interchangeable with middle rings from Hollowtech II cranksets
• Triple-chainring replacement for one-piece crank • Durable steel construction • Chain guard • 48/38/28-teeth chainrings
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
- Crank dust cap - Works with most three-piece crank models
- Sunlite Cottered Pins
Lizard Skins grip donuts feature a neoprene material printed with the Lizard Skins logo and add comfort to the flange side of the grip.
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
• Compatible with most side pull and center pull brakes • All weather compound
Replacement reservoir cap screw for Hope brakes.
Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.
• Replacement nut for recessed caliper brakes
Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.
Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle. - Includes barrel adjuster
Our mountain rim brake pads are available both with a threaded or smooth post.
Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable. - Lightweight resin/alloy design
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
$4.99 - $5.90
- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability
- Standard replacement cantilever/v-brake bosses
- Compatible with most side- and center-pull brakes - Excellent for BMX and freestyle - Hex nut type - All-weather compound
- Parts listed are for servicing and overhauling a single master cylinder/lever assembly
Shimano Dura-Ace R9100 Cassette Spacers
Accessorize your CAMO system with these high quality bolts. Made from durable ED coated steel, they're designed specifically for the CAMO system. - Bolts designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlocker
-Molded threaded BMX caliper brake pads
-Molded threaded u-brake pads
- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair
- Pad Attachment Style: Threaded Post - Rim Compatibility: Standard - Intended Brake Type: U-Brake - Pad Type: One Piece
Spacers to insure proper chainline and chainring spacing on your bike. - 3.5mm thick - Material: alloy
Converting from V-brake to disc? Plug the holes with Origin-8 Boss Plugs. Boss plugs provide a finished look to your brake conversion while also preventing moisture and debris from getting into your bike. - Fits into fork brake boss holes for V-brake to disc conversion
Page 1 of 132 Next page