Parts

- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

This Wheels Manufacturing Spacer kit for BB30 Outboard bottom brackets includes 42mm ID spacers that fit between the BB30-OUT cup and the frame's bottom bracket shell. Use spacers for adjusting chainline. - 42mm ID - Black anodized aluminum Includes - (1) x 2.5mm - (2) x 1.0mm

Enduro 24x37 ceramic hybrid sealed bearing for 24mm crank spindle applications. Direct OEM replacement for most BB86/92, Trek BB90/95, and with all Wheels Mfg. PF30 outboard, BB30 outboard, and BSA threaded bottom brackets. - Dimensions: OD: 37mm / ID: 24mm / Width: 7mm - Imported - Sold individually (Requires two to service both sides of bottom bracket)

This Wheels Manufacturing Spacer kit for PF30 Outboard bottom brackets includes 42mm ID spacers that fit between the PF30-OUT cup and the frame's bottom bracket shell. Use spacers for adjusting chainline. - 42mm ID - Black anodized aluminum Includes - (1) x 2.5mm - (2) x 1.0mm

Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

Loose ball headset bearing retainers. - Grade 300 bearings

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

Derailleur shims for adapting front derailleur clamps to a different sized frame seat tube. - Derailleur = the size of the clamp on the front derailleur you have - Frame = the size of the seat tube the derailleur plus shim will fit

Derailleur shims for adapting front derailleur clamps to a different sized frame seat tube. - Derailleur = the size of the clamp on the front derailleur you have - Frame = the size of the seat tube the derailleur plus shim will fit

This fine pair of Surly 10/12 Adapter Washers is designed to adapt any 135, 170, or 190mm O.L.D. QR axle hub with a 142, 177 or 197mm spaced thru-axle frame. Make sure the QR axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.

•Designed for caliper & cantilever brakes •Forged aluminum construction •25.4/26.0mm clamp •270g pair

• Forged aluminum • Integrated micro-adjust seat clamp

• Square taper interface • Only includes left crank

• Square taper interface • Only includes left crank • 175mm length

- DT Swiss cartridge bearings - Sold in pairs

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- One-piece ABS resin body - Molded pins - 320g pair

- One-piece bottom bracket cup set - Bearings included - Shell: 68mm - Spindle Type: OPC - Cup Material: Steel - Weight: 265 grams

• Aluminum • CNC-finished

• Aluminum clamp • Built-in rear rack mount

• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish

• Steel • Retainer ball bearings, includes top cap and star nut • 1 inch • S.H.I.S.: EC30/25.4, EC30/26

- Material: Heat-treated 4130 Chromoly - Splines: 8 - Diameter: 19mm - Length: 5.7/8" (150mm) - Spindle Bolts: 8x1mm (Included) - Compatibility: Fits Stolen OEM/MOB/SIC Mission Transit, Rant 8-S, Sunday Saker and most other 19mm, 8 spline cranks

The Thermalite pedals feature a concave, low profile design and are molded with Thermalite nylon material. - Micro knurling with 24 pins for traction - Recessed end to prevent damage to bearing cover - Chromoly spindle with 6mm broach and 15mm wrench flats - Weight: 391g - Pedal Body Material: Composite/Plastic