Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Pedals

Garmin Vector 3 Dual-Sensing Power Meter
$999.99
Dual-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3 pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3 has the sensors housed right in the pedals, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Measures total power, left/right balance, cadence and cycling dynamics - Sleek design provides greater cornering clearance and improved stack height - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours - Weight: 316 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/55 mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Garmin Vector 3S Single-Sensing Power Meter
$599.99
Single-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3S pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3S has a sensor housed in the left pedal, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Reports cadence and total power (watts) - Easily upgrades to dual-sensing system - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x2) - Battery life: up to 120 hours - Weight: 324 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/ 55mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Time Xpro 15
$500.00
The XPro 15 is the ultimate expression in pedal technology. Created for competitive cyclists and triathletes seeking a competitive edge, the XPro 15 features CeramicSpeed watt-saving bearings, a hollow titanium axle and a super light carbon body giving you a pedal that weighs 88 grams per pedal. ICLIC, with its pre-opened engagement system, makes it super easy to clip in. The low stack height and oversized pedal platform make pedaling more efficient and comfortable.
Garmin Vector 3S Upgrade Pedal
$499.99
Upgrade your Vector 3S to a dual-sensing power meter, and step beyond watts to see exactly how your pedaling style generates the force that moves you. When paired with Vector 3S, the upgrade pedal completes the Vector power meter system, providing left/right balance data and cycling dynamics. With the new podless design, it installs like any other bike pedal. Revolutionary cycling dynamics show you exactly where you’re generating power throughout the pedal stroke. See where you apply force on the pedal to ensure proper cleat position. The upgrade pedal also tracks when and how long you were seated versus standing so you can gauge position effectiveness.
Crank Brothers Candy 11 Pedals
$450.00
Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.
Crank Brothers Mallet Enduro 11
$350.00
The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all. - Titanium wings to reduce weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 6 adjustable pins per side for grip - Traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - 52mm q-factor for maneuverability on tight trails - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system
Time ATAC XC 12
$300.00
The ATAC XC 12 is the pedal of choice for Time's elite cyclocross and mountain bike riders. At 124 grams it's their lightest off-road pedal featuring a titanium axle and carbon body. Like the XC 6 and XC 8, it offers a tension adjustment and as with all ATAC pedals, XC 12 offers easy and consistent engagement and an open design that clears debris each time you step in.
Time Speciale
$295.00
Speciale is the ultimate balance between aesthetics and performance. Developed by Time's engineers for the demands of the sport, this enduro pedal is made of a 6106-T6 aluminum body which is 20% more durable than other grades of aluminum. It features a wide platform, adjustable pins for optimal grip, and a micro-adjustable clamping system to meet the demands of the most advanced riders. The proven ATAC engagement system (TIME patent) allows easy clip in and positive, predictable release as well as a design that self-cleans even in the most difficult conditions. Like all Time pedals, the Speciale is 100% made in France at their factory in Nevers, exceeding high material and production standards.
HT Pedals T1T Pedals
$235.00
HT's T1T Pedals boast a titanium spindle for light weight. The 16.8mm low profile and 68x83.5mm base platform allow for increased stability on aggressive terrains. T1 features HT's unique proprietary clipless system with its adjustable dual tension settings for secure foot-holding under any condition. - Titanium spindle - Platform: 68 x 83.5 x 16.8mm - Extruded CNC-optimized aluminum for strength to weight ratio - EVO bearings system (needle bearings) and 1 DU bushing per side - 2 adjustable pins per side for additional traction - HT exclusive X1 or X1F cleats - 4 deg (X1), 8 deg (X1F) float and 13 deg release angle
Xpedo Baldwin Ti Pedals
$189.00
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float) *Titanium spindles have 180lbs weight limit.
HT Pedals T1-SX BMX-SX Pedals
$175.00
The T1-SX BMX pedal offers excellent spring tension and feel. Unclipping under maximum load is a thing of the past with the T1-SX's hook plate techology. EVO+ bearing system featuring IGUS bushings keeps these pedals running smoothly. - 68 x 84 x 17mm - 9/16"
Crank Brothers Candy 7 Pedals
$169.00
Competition-oriented and customizable for refined fit, feel, and power transfer. Details - Durable alloy body - Durable cast steel wings - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - Hex alloy endcap and bashguard - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system Specs - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 52mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 320g per pair - Wing Material: 17-4PH stainless
HT Pedals X2 DH Race Pedals
$169.00
To create its new X2 DH clipless pedals, HT Components started with the effective design of its X1 downhill pedals. The X1's platform was altered to make the X2's easier to get in and out of with a wider variety of shoes. The X2 uses a thinner, 14mm platform than the X1's to allow them to be more responsive, and it uses a slimmer cage design on the CNC-machined body. - Platform:85 X 94 X 14mm - EVO+ bearings with single DU bushing per side - 5 replaceable pins - High spring tension - 9/16"
HT Pedals X2-SX BMX Pedals
$169.00
HT X2-SX BMX pedals have stiffer springs and improved bolts and plates compared to the standard X2. The X2 uses a thinner 14mm platform and a slimmer cage design on the cnc-machined body. - Platform: 85 x 94 x 14mm - EVO+ bearings with single DU bushing per side - 5 replaceable pins - High spring tension - 9/16"
45NRTH Helva
$165.00
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams
SDG Jr. Pro Kit
$149.99
The industry’s first all-in-one premium youth components upgrade kit, which is ergonomically optimized to enhance performance and ultimate control. - Includes Slater 90 pedals, Slater 650 bar, Slater Jr. grips, and a Fly Jr. saddle - Includes light plastic 22.2 to 19mm shims, located inside the packaging with the instruction manual - Age: Youth - Rail Material: Steel - Clamp Style: Standard Rails - Material: Synthetic - Length: 235mm - Width: 122mm - Weight: 270g
Ritchey WCS Trail Pedals
$139.95
The WCS Trail pedal packs in all the design upgrades as the WCS XC, but adds a forged alloy cage for a larger footprint and even greater stability. A new engagement system with a fixed front claw now provides best-in-class entry and release and excellent mud-shedding characteristics. The axle system has been revamped for even greater bearing life while achieving an even lower axle-cleat height than the previous design, and a wider body improves stability. The bushing, needle and cartridge bearing system promises long service life and excellent protection from the elements, and easily serviceable. - Cleats included - 9/16"
Crank Brothers Candy 3
$135.00
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
Crank Brothers Eggbeater 3
$135.00
Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years
Time ATAC XC 8
$130.00
The ATAC XC 8 is the pedal preferred by competitive cyclocross, mountain bike riders, and gravel road riders. It features the lightness of a carbon body and the durability of a chromed, hollow oversized steel axle. The exclusive ATAC system (TIME patent) offers very easy engagement and its open design automatically clears debris each time you step in. The ATAC XC 8 is also a great choice for trail riding or bike touring.
iSSi Trail III Pedal
$125.00 - $130.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution.
Xpedo GFX Pedals
$129.00
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)
iSSi Flash III
$105.00 - $120.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
Spank Spike Flat Pedals
$119.00
The original game changer! SPANK Industries' SPIKE Pedals changed the world's concept of the benefits a flat pedal can offer and set the benchmark for top of the line value. The SPIKE Pedal's svelte 12mm thin forged alloy body not only maximizes pedaling clearance, but also grip and stability, by placing the rider's foot closer to the pedal axle. Equipped with forged hollow-tapered chromoly steel axles, SPIKE Pedals offer unmatched ultimate strength at just 420g per set. 20 steel pins in a virtual concavity configuration offer supreme grip without compromising platform thickness. Oversized industrial sealed bearings and IGUS bushings guarantee exceptional durability and performance. Often imitated, the SPIKE's CNC chamfered leading edges deflect impact forces and bring and instantly recognizable edgy aesthetic that always turns heads. - 12mm thin - Massive 100x100mm platform - ±420g/set (with full pin complement) - Cold forged, CNC optimized alloy pedal body - Cold forged chromoly steel axle - Chamfered leading edges for improved clearance and reduced impact forces - Chamfered side edges for improved cornering clearance - Oversized sealed full compliment inboard industrial bearing - Sealed outboard IGUS bushing - 20 adjustable pins per pedal - Full sized hex head pins improve durability and maintenance - Inboard friction seal prevents contamination and reduces unwanted pedal spin
iSSi Stomp
$115.00
Stomp pedals feature a truly concave shape and proprietary pin profile, making these a leader in traction and feel. Fully extruded and CNC-machined to be the ultimate off-road pedal for everything from an all-mountain ride with friends to enduro racing. - Bushing & double bearing spindle configuration - Full-length chromoly spindles for durability - 44 iSSi concave pins (11 per side) and installation tool included - Platform size: 120 x 95 x 18mm - 57mm spindle length
iSSi Stomp XL
$115.00
Stomp pedals feature a truly concave shape and proprietary pin profile, making these a leader in traction and feel. Fully extruded and CNC-machined to be the ultimate off-road pedal for everything from an all-mountain ride with friends to enduro racing. - Bushing & double bearing spindle configuration - Full-length chromoly spindles for durability - 44 iSSi concave pins (11 per side) and installation tool included - Platform size: 120 x 102 x 18mm - 64.5mm spindle length
iSSi Trail II Pedal
$105.00 - $110.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.
iSSi Road Carbon Pedals
$100.00
The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life. - Simple installation with a 8mm hex key - Stainless Steel cleat plate provides a solid pedal interface - Adjustable spring tension - 7° float, 3-bolt split-cleat included - Cleat Interface: Look KeO - Material: Carbon - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Single-Sided Clipless - Spindle Material: Chromoly steel - Weight: 266 grams
Crank Brothers Candy 2
$99.99
Crank Brothers' most versatile pedal. The Candy excels at it all — cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged scm 435 chromoly steel Body material: 6061-T6 aluminum Wing material: Stamped steel Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 355g per pair Warranty: 5 years
Crank Brothers Mallet 2 Pedals
$99.99
The Mallet 2 pedal from Crank Brothers is ready to drop the hammer. No, seriously, this thing has been redesigned and rebuilt from the ground up, and it's a whole new creature. Durability and a lightweight aluminum body take the center stage in this versatile pedal that's equally at home shredding singletrack and providing a platform for your sneakers while you ride to class. The Mallet 2 offers a flat pedal feel and clipped-in control simultaneously for the best of both worlds and performance you can feel. And, with a customizable float and release angle, your body will thank you with miles and miles of fun.
Page 1 of 3 Next page