Entirely developed, designed, and produced in Denmark by CeramicSpeed, the Oversized Pulley Wheel System for SRAM eTap is a huge technological advance for the cycling industry. Matching the highest quality materials with a unique design, the OSPW System delivers lower friction and longer lifetime, improving your competitive advantage. Thanks to the OSPW System for SRAM eTap, the power savings over OEM pulleys start at 40%, and the CeramicSpeed Bearings inside guarantee 3-5 times greater longevity compared to commonly used standard pulleys on the market. The watt savings with a CeramicSpeed OSPW System for SRAM eTap start at 1.6 watts. The OSPW system for SRAM eTap derailleurs is compatible with up to a 32-tooth cassette size and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12-speed SRAM eTap AXS. If you have the updated 11-speed SRAM eTap derailleur featuring the orbit clutch, you will need the CeramicSpeed OSPW System for SRAM eTap AXS derailleurs. - The overall power savings of the OSPW System for SRAM eTap commonly reach 40%-60% over a stock setup. - The oversized pulley wheels have a lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. - The OSPW system for SRAM eTap derailleurs is compatible with up to a 32-tooth cassette size and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12 speed SRAM eTap AXS. - This 3D-printed titanium version of the OSPW System comes with our CeramicSpeed Coated Bearings for even longer service life and lower friction. In The Box: - Oversized Pulley Wheel System - CeramicSpeed Bearing Oil in 15 ml dropper bottle - Sticker sheet - IMPORTANT: When traveling, please remember to dismount your entire rear derailleur with an Allen key, as the OSPW System will not fit safely in most bike travel bags and could be damaged if left on.
The absoluteBLACK's HOLLOWcage® Oversized Derailleur Pulley Cage for Shimano 9100 / 8000 features a revolutionary mono-plate design to provide quiet and precise shifting. - Designed for use with Shimano Dura Ace 9100 / 9150 / 9170 , and Ultegra 8000 / 8050 - Fits up to a 32T cassette - The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise -Flexible cage design aligns better with the angle of the chain when using the higher gears of the cassette - HOLLOWcage uses abnormally large, bespoke, full ceramic bearings that make the pulleys incredibly stiff for greater shifting precision - Upper pulley features tall teeth to provide improved shifting precision
The fastest oversized pulley wheel system in the world is also available for SRAM Rival & Force 1 Type 3 derailleurs. Featuring 14-tooth (upper) and 18-tooth (lower) pulleys with a narrow-wide profile, the OSPW X System for SRAM Rival & Force 1 Type 3 is available fitted with CeramicSpeed standard or coated bearings, with up to a 6-year warranty. The unique narrow-wide tooth profile of the pulleys ensures durable chain retention. The system is fitted with a custom-designed, strong carbon fiber pulley cage assembly for outstanding durability and light weight. The cage design allows you to choose between two spring tension settings to customize performance and reduce chain drag. We recommend initial setup in the lower spring tension. This has been designed to leave the clutch mechanism fully functional for chain retention. In the event that the low spring tension does not provide adequate shift quality on very rough roads, you can increase it to the high-spring tension, which corresponds to the factory settings. Thanks to the high-quality CeramicSpeed Bearings inside, your product will benefit from a 3-5 times longer lifespan than stock, and it has been tested to deliver 30-40% less friction than conventional systems. This product is completely developed and handbuilt in Denmark, including the top quality CeramicSpeed Bearings inside. The OSPW X System for SRAM Rival & Force 1 Type 3 is compatible with SRAM Rival or Force 1X 11-speed with Type 3 clutch, regardless of the cage length. Note that the cage lock must be in the 8 o'clock position, not the 5 o'clock position. This product is NOT compatible with Type 2.1 clutch derailleurs. In The Box: - A complete 14-tooth/18-tooth OSPW X System for SRAM 1x - CeramicSpeed bearing oil in 15ml dropper bottle - Sticker Sheet
Improve the performance of your 11-speed Shimano rear derailleur with pulleys that reduce friction and increase bearing life. Ours are designed to work with less drag, adding to the power transmitted to the rear wheel. Our Titanium Pulley Wheels for Shimano 11s are available with CeramicSpeed Coated Bearings that add an extra layer to the performance of the product. The Coated Bearings have races 75% harder than our hardened-steel races. They last 60% longer than our Standard Bearings. Bearing drag is decreased by over 50% compared to our Standard Bearings. Both our Standard and Coated come with the same super-hard, super-round CeramicSpeed Balls. Designed in light and strong machined Titanium, these Pulley Wheels offer three times the lifespan of our alloy Pulley Wheels, and are compatible with all 11-speed Shimano derailleurs. - There is both an upper and lower-specific pulley in the set. They are marked accordingly and have directional arrows, as well. - These pulleys are compatible with all Shimano 11-speed rear derailleurs, both mechanical and electronic. - The kits come with CeramicSpeed oil in a 15ml dropper bottle, and the bearings come pre-oiled. In the box: - 2 x 11-tooth pulley wheels - 4 x spacers - CeramicSpeed Bearing Oil in 15 ml dropper bottle - Sticker sheet
Entirely developed, designed, and produced in Denmark by CeramicSpeed, the Oversized Pulley Wheel System for SRAM eTap is a technological advance for the cycling industry. Matching the highest quality materials with a unique design, the OSPW System delivers lower friction and longer lifetime, improving your competitive advantage. Thanks to the OSPW System for SRAM eTap, the power savings start at 40%, and the CeramicSpeed Bearings inside offers a 3-5 times longer lifespan compared to standard pulleys on the market. The watt savings with a CeramicSpeed OSPW System for SRAM eTap start at 1.6 watts. This 17/17-tooth OSPW system for SRAM eTap derailleurs is compatible with up to a 32 tooth cassette and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12-speed SRAM eTap AXS. If you have the updated 11-speed SRAM eTap derailleur featuring the orbit clutch, you will need the CeramicSpeed OSPW System for SRAM eTap AXS derailleurs. The typical overall power savings of the OSPW System for OSPW System for SRAM eTap is 40%-60% over a stock setup. The oversized pulley wheels have lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. In The Box: - Oversized Pulley Wheel System - CeramicSpeed Bearing Oil in 15ml dropper bottle - Sticker Sheet
- Damper Upgrade Kit—PIKE 27.5"Boost(A2/2017)/PIKE27.5"/29"(B1+/2018+)/Revelation(A1+,35mm/2018+)
SRAM's 1x Eagle component system boasts a twelve-speed cassette. We built pulleys that can handle the load better than stock. These CeramicSpeed Pulley Wheels work with less drag, adding to the power transmitted to the rear wheel while offering greater durability, going longer between replacement intervals. These pulleys are also fully compatible with the SRAM Eagle AXS derailleur. The aluminum pulleys with standard bearings are 34.4% more efficient than stock and use our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The upper and lower pulleys both have a narrow-wide tooth design with 14 teeth each. As the upper and lower pulleys have different tasks, they have different shapes. You'll find they are thus marked, and have directional arrows. These pulleys should be installed with stock SRAM pulley spacers. Save those from your old pulleys before installing CeramicSpeed. The kits come with CeramicSpeed Oil in a 15ml dropper bottle and grease in 5ml syringe. The bearings come pre-oiled. The grease can be used on the pulley bearings when riding in particularly harsh environments. In the box: - 2 x 14-tooth pulley wheels - CeramicSpeed Bearing Oil in 15ml dropper bottle - CeramicSpeed Grease in 5ml syringe - Sticker sheet
RockShox Reverb Service Kits - 12 of Each size Key, 3 Top Cap Assemblies, 10 Blue 1-Piece IFPs, 10 Foam Rings, 10 Inner Seal U-Cups, 10 Inner Seal Head Bushings, 10 Inner Seal Head O-Rings, 10 Strain Relief Barbs, 10 Remote Barbs, 10 Bleed Screws, 10 Air Valve Caps, 6 Seat Bolts and Nuts, 10 Main Piston O-Rings
- CHARGER 2.1 RC2 Crown High Speed, Low Speed Compression (Includes Complete Right Side Internals)—Lyrik B1+/Yaki A1+ (2016+)
5-Speed Sturmey Archer Coaster Brake Trike Conversion Kit - 21T Front Drive Cog - 22T Rear Transfer Cog - 24T Axle Drive Cog - Cable stop required when installing on Sun Atlas Industrial Cargo Trike
- Includes 61803 (1) and 61903 (1) bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp Super-9, 900 tubular and Sub-9 disc rear hubs
- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - These 61803 bearings are not interchangable with the 88/188 hub 61803 bearings
Replacement Pulley Wheels for the CeramicSpeed OSPW System. Includes 2 pulley wheels. - Precision-machined aluminum pulleys - For use with CeramicSpeed's Oversized Pulley Wheel System only - Coated races increase bearing service life by increasing hardness of race and reducing corrosion - CeramicSpeed products with coated bearings include a 6-year warranty
- CHARGER 2.1 RCT3 Crown (Includes Complete Right Side Internals)—Lyrik/Yari (A1-B1/2016+)
- CHARGER 2.1 RCT3 Crown (Includes Complete Right Side Internals)
- Damper Upgrade Kit—CHARGER RACE DAY Remote (Includes Complete Right Side Internals, remote sold separately) - 32mm 100mm Max Travel - Reba A7 80-100mm (2018+)/SID 100 A1 (2017+)
Three-Speed Sturmey Archer Coaster Brake Trike Conversion Kit - 21T Front Drive Cog - 22T Rear Transfer Cog - 24T Axle Drive Cog - Cable stop required when installing on Sun Atlas Industrial Cargo Trike
Your Sun Traditional Trike can be made even more useful with the addition of twist-shift 7-speed gearing and a powerful rear disc brake! This complete kit includes all necessary components for converting your 2016 or later Sun Traditional Trike to a 7-speed derailleur system with a mechanical disc brake, giving you an easy and efficient ride up and over any type of hill and smooth, safe stopping on the other side. The parking brake feature on both front and rear brake levers allows you to lock either or both brakes simultaneously to load or unload with ease. Simple and common parts mean easy maintenance for years of use. Kit includes all components including items such as cable ties and other small parts for an original-equipment look. - Sun Race M30 7-speed twist shifter - Sun Race M40 7-speed direct-mount derailleur - Sun Race M3 7-speed freewheel (13-15-17-19-21-24-28T) with 15mm trike axle adapter - 36T x 1/2" x 3/32" chainring - K.M.C. Z51 1/2" x 3/32" chain - Promax DSK-300 mechanical disc brake and mounting hardware - Promax 160mm stainless steel rotor with 15mm trike axle adapter - Promax BL-46K 4-finger brake lever with parking lock - High-density black foam grips, 92mm left side / 130mm right side - Kit includes all parts needed for complete installation - Kit only compatible with 2016 or newer Sun trikes with rear derailleur and disc brake mount on rear unit
105 piece assortment of 1-1/8" aluminum headset spacers
Campagnolo's Record EPS V2 Interface Unit is like a translator, the vital piece of the electronic shifting puzzle. Mounted to the brake cable or the handlebar, it processes the data churned out by the EPS Power Unit (sold separately) and communicates it to you via an easy-to-read colored LED. Plus, it plays the critical role of converting every analog shift you send its way into a digital format so the system can work as a cohesive whole. There's also an easy-to-read LED battery gauge so you know when it's time to recharge the system. And don't mind the weather, as it's totally waterproof.
$173.00 - $179.00
This hydraulic lockout offers completely sealed and dependable fork or rear shock lockout control through the click of an easy-to-reach button that can be triggered with a single thumb press. Press on to lock, press again to unlock. It’s just that easy. - Includes Hose, Banjo, Cover Part
The perfect bike fit needs to blend slippery aerodynamics and a comfortable, stress-free body position while optimizing control over the bike. Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka Carbon Evo extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. The Evo shape, with a 20mm inward roll and multi-radius bend, is constructed using carbon fiber, allowing for even more complex shaping and lighter weight. - Compatible with all 22.2mm clip-on systems - Material: Unidirectional carbon - Internal cable routing - Length: 380mm
RockShox, 11.4018.028.014, 35mm SKF dust seals (20X)
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 30mm - Outer Diameter: 42mm - Width: 7mm
- Shiftable guide for SRAM and Shimano 2X cranks - Patented removable skid - Dual 9t sealed-bearing pulley design for superior chain management - BB, ISCG and ISCG-05 mounting options, 136g
Includes remote, bleeding edge fitting, discrete clamp, MMX clamp Specifications - Application (RM): Seatpost telescoping - Orientation: Above bar Left/Below bar Right, Above bar Right/Below bar Left, Left, Right - Mount Type (RM): MatchMaker X, n/a - Cable pull (RM): n/a - Model (Service Kits): n/a
- Includes stock replacement retainers for headsets, bottom brackets and hubs - Headsets: (8) 5/32"x22, (8) 5/32"x16, (8) 3/16"x15, (24) 5/32"x20; - Bottom brackets: (12) 1/4"x9, (16) 5/16"x9, (16) 5/16"x10 - Hubs: (8) 3/16"x7, (16) 1/4"x7
Gain an aerodynamic advantage with Origin-8's Tri Clip-On Aero Bars. These aluminum clip-ons fit a wide range of handlebars. With independent arm rests and bar-angle and reach adjustments, it's easy to get a great-fitting aero setup.
$76.00 - $149.00
The OneLoc remote from RockShox provides total control over your RockShox fork at your fingertips. The increased leverage at the bar, translate in a smoother and easier actuation. Its countless mounting options (left and right, below or above the bar, tall or standard clamp) make it an ideal companion for SRAM's drivetrain, brakes, and RockShox's Reverb remote (all sold separately). Includes remote, cable and housing.
- Includes barb and olive - Brake Lever Clamp: 22.2mm, MMX compatible - Lever Blade Material: Carbon - Reach Adjust: Tool-free
Page 1 of 30 Next page