Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools

Wolf Tooth Components Master Link Combo Pliers
$32.95 - $37.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
Wheels Manufacturing Inc. Sealed Bearing Extractor 10mm
$39.95
Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6000 - 6200 - 6800 - 6900
Unior Pedal Thread Insert
$9.99
- Pedal thread inserts are used to replace damaged threads in cranks
Unior Pedal Thread Insert - Right, 9/16''
$9.99
- Pedal thread inserts are used to replace damaged threads in cranks
Topeak Nano TorqBox
$29.95
TorqSocket kit works with any mini-tool containing a 5 mm Allen wrench (or single 5 mm Allen key). Applies correct torque on component bolts for safety and to prevent damage to carbon parts. - Includes 3,4.5mm hex bits, T20 & 25 Torx - Packaged in own carrying case - Material: Hardened steel - Size: 2.1" x 2" x 0.9" - Weight: 75g
Topeak Ratchet Rocket Lite DX
$39.95
Topeak's Rocket Ratchet features a fine tooth ratchet mechanism with reverse lever and thumb wheel for quick rotation and control in tight spots and includes hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T10, T25 Torx and #2 Phillips bits, 2 plastic tire levers and magnetic bit holder. It's everything you need in a compact, lightweight package.
Surly Singleator Wrench
The Surly Singleator Wrench is made from leftover stainless steel and serves two important functions: its 18mm wrench is perfect for adjusting the tension on your Singleator, and it opens bottles. Seriously. What a great way to reduce, reuse and recycle.
Sunlite Pencil Air Gauge
$3.00
• Pencil type w/clip
Sunlite Shimano Freewheel Remover w/Guide
The Sunlite Shimano Freewheel Remover w/Guide fits the lockring on Shimano cassettes. Its hardened steel construction will last longer than your cassettes.
Stan's NoTubes DART Refill
$20.00
- 5 DART plugs for use with the Stan's NoTubes DART tool
Stan's NoTubes Dart Tool
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
RockShox Air Can Service Kit
$9.00 - $24.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
RockShox Eyelet Bushing Tool
$28.00
Eyelet Bushing Tool
RockShox Fork Service Kit
$17.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
RockShox Recon Gold RL A4 (2018+) 200 Hour/1 Year Service Kit
$19.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon Gold RL A4 (2018+)
RockShox Reverb Seatpost Bleed Tool
$6.00
RockShox, 00.6815.066.020, Reverb post bleed tool
RockShox Reverb Seatpost Oil Height Tool
$7.00
RockShox, 00.6815.066.010, Reverb oil height tool
RockShox SID XX/RL B1 1 Year Service Kit
$48.00
- SID XX/RL B1 1 year service kit - Includes dust seals, foam rings, o-ring seals, damper sealhead
Prestacycle Fixit Sticks Go
$29.95
Compact tool set mounted to your frame! Prestacycle Fixit Sticks enables you to carry a small T-Handle tool on the Frame of your Bike. The convenient mounting bracket fits the tool between your frame and Water Bottle. Instantly take the tool off your bike and work. Prestacycle Bits included. - Dual Shafts combine to for a T-tool - Shafts carry four different Bit sizes - Mounting bracket holds tool between your frame and Bottle - Includes Prestacycle Bits Sizes: - HEX: 3mm, 4mm, 5mm - TORX®: T25
Prestacycle Pro T-Handle Ratchet Deluxe, Three Way Ratchet & T-Handle Tool Kit
$39.95
Attractive, durable foam-lined zipper carry case. Perfect for protecting your tool and keeping your bits within easy reach. 12 of the most common Bit sizes for bicycles are included inside. Weather-resistant case materials and impact protection make this the perfect case to add to your toolset-to-go. A complete pocket multi-tool! Three-way pocket Ratchet with Extension and T-Handle function, all in a compact, lightweight design to carry on your bike! The Patented reversible thumb-wheel ratchet head is rated to up-to 60Nm of total force, so this tool can even be used to install and remove Pedals. A high quality, durable tool. Prestacycle T-Handle 3 way Ratchet is compatible with all tool bit sets from Prestacycle and all standard ¼ bits. The patented Ratchet head firmly holds bits in place without a magnet. Releasing the bit is simple with a finger-press into the hole on the top. The ratchet offers an easy to use thumb wheel to speed screw installation and removal. The ratchet reverse knob is easily accessible right on top of the tool. Highest quality bits Prestacycle offers the highest possible quality 1/4" hex tool bits for use on Bicycles and much more. Our bits are compatible with all Prestacycle hex-based hand tools, and are industry-standard to fit all other tools that use 1/4" hex bits. Engineered for long life All Prestacycle Professional bits are made with hardened S2 steel, which is much stronger than most hand tools which are made of CRV Steel. S2 steel also resists stretching, preventing rounded edges on the bits that could damage bolts. We apply nickel-plating to all Professional bits to prevent marring to Stainless Steel, Aluminum and Titanium screws and to provide a long-lasting finish. Specific hex bits have micro surfacing to reduce slippage when in use. Specifications: - Carry-along pocket Ratchet with 1/4" bits set - Remove and install all kinds of Bolts and Screws on your Bike - Slimline 100mm Extension can also be 50/50 installed to use as a T-Handle. - Patented Reversible Ratchet with thumb wheel. - Heavy-duty design withstands up to 60Nm of force. - Uses standard 1/4" Hex bits of all sizes. - Dimensions 4.5" x 5/8" x 7/16" (119mm x 16mm x 12mm). - Tool weight (including extension) is only 88 Grams! - 12 piece Bicycle Tool Bits set - Precision tools in 12 unique sizes specific for bicycles - Hardened steel bits are non-marring on titanium and alloy bolts - Trim-able bit carrier for a custom tool-set to-go Sizes: - HEX: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm - TORX®: T10, T20, T25, T30 - SCREWDRIVERS: PH1
Prestacycle Torqratchet Deluxe
$49.95
Attractive, durable foam-lined zipper carry case. Perfect for protecting your tool and keeping your bits within easy reach. 12 of the most common Bit sizes for bicycles are included. Weather-resistant case materials and impact protection make this the perfect case to add to your toolset-to-go. A complete pocket multi-tool! Grab the red handle and tighten or loosen screws and bolts all over your bike. The Patented reversible thumb-wheel ratchet head is rated to up-to 60Nm of total force, so this tool can even be used to install and remove Pedals. Tighten each bolt to exact torque! When tightening, finish by pushing on the end-knob. As you tighten, the arrow on the knob will point to the current torque. When the arrow reaches the correct torque, stop tightening. You're done! A high quality, durable tool. Prestacycle TorqRatchet is compatible with all tool bit sets from Prestacycle and all standard ¼" bits. The patented Ratchet head firmly holds bits in place without a magnet. Releasing the bit is simple with a finger-press into the hole on the top. The ratchet offers an easy to use thumb wheel to speed screw installation and removal. The ratchet reverse knob is easily accessible right on top of the tool. The Patent pending Beam torque wrench hidden and protected inside the handle uses hardened alloyed steel and is rated in excess of 5000 cycles and can be re-calibrated by Prestacycle. Specifications - Carry-along pocket Ratchet with 1/4" bits set - 2~10Nm Torque Wrench all in the same tool! - Remove and install all kinds of Bolts and Screws on your Bike. - Finish tightening by pushing the Torque Knob until the arrow reaches your torque - Patented Reversible Ratchet with thumb wheel - Heavy-duty design withstands up to 60Nm of force - Torque scale on Both sides for upside-down use - Uses standard 1/4" Hex bits of all sizes - Calibrated accurate for over 5000 cycles of Torque tightening - Dimensions 5.25" x 11/16" x 7/16" (133mm x 17mm x 12mm) - Tool weight is only 68 Grams! - 12 piece Professional Bicycle Tool Bits set - Precision tools in 12 unique sizes specific for bicycles - S2 Nickel-plated Hardened steel bits are non-marring on titanium and alloy bolts Sizes: Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm TORX®: T10, T20,T25, T30 Screwdrivers: PH1
Portland Design Works 3wrencho
$22.00
Portland Design Works' 3wrencho is a strong and versatile addition to your fixed gear, townie or workbench! Made of heat-treated steel for extra toughness, it's part tire lever, part 15mm wrench. Its strong nylon coating won't scratch rims, so you can pry as hard as you need to remove stubborn tires. Step on the 3wrencho for extra leverage to loosening axle nuts. May also be used to spread peanut butter, stir a drink, or open a letter. - Length: 114 mm (4.5") - Weight: 95 g (3.5 oz)
Pedro's BB Socket Holder II
$15.99
- Holds socket tool to BB axle to eliminate slippage during removal and installation. New spring preload allows increased flexibility and rotation during use. - New design works with square taper and splined axles with M8, M12, or M15 internal spindle thread. - Made from heat-treated tool steel for the ultimate in strength and lasting performance. - Use with Pedro's Splined Bottom Bracket Socket. Compatible with Pedro's Pro Socket Handle. If you have ever battled with an over-tightened Shimano and ISIS Drive splined bottom bracket cup, you know why Pedro's created the BB Socket Holder. Though these types of bottom brackets proved themselves as the standard for many years and continue to be found on many bikes, the tendency for their shallow splines to slip during removal or installation has resulted in more than a few expletives, high frustration levels, and worst of all, injuries. The Pedro's BB Socket Holder II provides a simple, shop-quality tool that solves this problem. The new design works on bottom brackets spindles with M8, M12, or M15 threads and adds spring preload for increased flexibility and rotation during use. Backed by Pedro's lifetime warranty.
Pedro's Cassette Lockring Socket
The Cassette Lockring Socket is designed to work seamlessly with Pedro's snap-channel Pro Socket handle, any 24mm socket/wrench, a square 1/2" drive, or in a bench vise. - Fits all Shimano, SRAM, SunRace, SunTour, Chris King, and other HG standard cassette lockrings and Shimano disc brake lockrings - Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, a square 1/2" drive, or in a bench vise
Pedro's Hex Bit Set II
$21.00
- Perfect companion for your Pedro's torque wrench - Bits made from premium S2 tool steel to ensure strength and lasting performance - Includes 16 hex and torx bits and 2 drive adapters in convenient holders - 50mm length bits in key sizes ensure component compatibility Pedro's Hex Bit Set II is designed to work with our torque wrenches offering an extensive range to handle most hex and torx needs. The set includes longer 50mm bits in key sizes to ensure compatibility and fit with all components where standard 25mm bits fall short. Bits are made from premium S2 tool steel for strength and lasting performance. Set includes: - Hex: 2, 2.5, 3, 4, 5, 6, & 8mm (25mm), 4 & 5mm (50mm) - Torx: T10, T15, T20, T25, & T30 (25mm), T25 & T30 (50mm) - Drive Adapters: 1/4-inch square to 1/4-inch hex & 1/4-inch hex to 1/4-inch square
Pedro's Quick Link Pliers
$15.00
These quick-link pliers make fast work of pesky or stubborn chain master links. The laser-cut, heat-treated jaws feature a dual-function design, allowing both installation and removal of master links. Cushioned grips provide comfort and control. -Laser-cut, heat-treated, dual-side jaws both install and remove master links -Cushioned grips provide comfort and control
Pedro's Tire Levers
$5.49 - $120.00
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking
Pedro's Tire Levers
$5.25 - $126.00
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking
Park Tool 3-Way Socket Wrench
$15.95
Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.
Park Tool AWS-3 3-Way Hex Wrench - 2mm/2.5mm/3mm
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
Page 1 of 23 Next page