Other
Snap-on brake cable guides for bikes that don't have any.
- Steel cable housing guide for 1-1/8" top tubes
- Snaps on; no bolts
- Set of 3 clamps
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts
- Clamp Size: 25.4mm
- Material: Alloy
- Cable hanger and straddle cable
- Alloy construction
- Anodized finish
- Great for Canti and U-Brakes
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 41 and 42mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each from Cane Creek.
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Lightweight aluminum construction
- Allows the installation of a straight steerer fork without changing out the headset lower
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap
- Clamps to a threadless steerer
- Offers up to 4-1/2" stem height increase
- Forged 6061-aluminum provides extra strength
- Machined aluminum top cap is threaded, providing easy installation
Dimension Seatpost Clamps
- Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm
- Weight: 34g
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
High-quality replacement headset bearings are smooth like butter.
- Sealed cartridge bearing for long life
- Durable steel bearing housing
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
Rebuild seal kits for Fox rear suspension service and repair.
- Includes parts needed for rebuild
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks.
- M12 bolt
Page 1 of 9
Next page