Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Forks

$1,549.99
Get Inverted. Back and better than ever the new Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you’re looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah the Dorado Expert has you covered. Featuring an all-new 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide the new Dorado is your ticket to the best ride you’ve ever had. Key Features: - New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - The Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air-fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. - IVA (Incremental Volume Adjust) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston and your volume amount. - The new TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring-backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle-to-crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with carbon fiber legs - Externally Adjustable: high-speed compression, low-speed compression, and rebound - Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate - TPC+ Damper with HBO (Hydraulic Bottom Out) - TSR Bleeders - Includes removable bolt-on fender
$1,299.99
Coil Fans Rejoice! Once again, the Dorado is available with a coil option. The new Dorado Comp features the same 37mm chassis as the Expert but with a more set-it-and-forget-it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability, and easy serviceability. The Dorado Comp is built for riders who just want to ride and not sweat any of the small stuff. Key Features: - New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version. - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - Coil Spring provides maximum bump sensitivity and simple service procedures. The standard spring rate provided in the fork is a medium rate of 35lb/in. For tuning, there are six spring rates available for this fork; 25lb/in, 30lb/in, 35lb/in, 40lb/in, 45lb/in, and 50lb/in. - ABS+ damper is known for its incredible reliability and easy tunability. Adjustments include a low-speed compression adjustment and a low-speed rebound adjustment. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle to crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with carbon fiber legs - Externally Adjustable: high-speed compression, low-speed compression, and rebound - Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate - TPC+ Damper with HBO (Hydraulic Bottom Out) - TSR Bleeders - Includes removable bolt-on fender
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding - GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance - FLOAT EVOL air spring technology increases negative air spring volume, optimizing small bump sensitivity - Direct mud guard mount - Genuine Kashima Coating on upper tubes - 27.5: 723mm peak tire diameter
$1,224.99
Coil Fans Rejoice! Once again, the Dorado is available with a coil option. The new Dorado Comp features the same 37mm chassis as the Expert but with a more set-it-and-forget-it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability, and easy serviceability. The Dorado Comp is built for riders who just want to ride and not sweat any of the small stuff. Key Features: - New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version. - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - Coil Spring provides maximum bump sensitivity and simple service procedures. The standard spring rate provided in the fork is a medium rate of 35lb/in. For tuning, there are six spring rates available for this fork; 25lb/in, 30lb/in, 35lb/in, 40lb/in, 45lb/in, and 50lb/in. - ABS+ damper is known for its incredible reliability and easy tunability. Adjustments include a low-speed compression adjustment and a low-speed rebound adjustment. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle-to-crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with aluminum legs - Externally adjustable low-speed compression spring preload and rebound - Includes removable bolt-on fender - 2.6 max tire width - 223mm max rotor diameter
$1,159.00
- 38mm chassis for increased stiffness and rider confidence - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height. - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature - Includes premium short fender
$1,159.00
Built for the best riders, ridden on the hardest tracks, ZEB Ultimate rules the world’s toughest enduros. Equipped with the new Charger 3.1 RC2 damper, ZEB gives riders exceptional adjustability for the right balance of comfort, control, and speed. Alongside this flagship damper, the stout 38mm chassis rides on vibration-killing ButterCups and a DebonAir+ spring. The technology you need for the fastest split times, the style you want on the start line: This is ZEB. FEATURES - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in Signature colorways Electric Red, Slab Grey or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)
$1,149.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,139.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment
$1,107.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included
$1,099.99
Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - 27.5” and 29” wheels - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - MC² bladder cartridge damper offers adjustable high-speed compression damping, low-speed compression damping - Expansion bladder with patent-pending blow-off valve compensates for oil displacement, with lower friction than a traditional internal floating piston - 37mm chassis with torsional stiffness up to 30% higher than similar forks from competitors - Dorado Air spring features an enlarged negative air chamber for linear initial stroke and reduced IRT volume for progressive end stroke - Internally adjustable travel from 180mm to 140mm
$1,099.00
The most versatile fork in our lineup, Lyrik harmonizes descending power with effortless efficiency. Lyrik’s legendary performance enters a new era with the Charger 3.1 RC2 damper that offers a wider tunable range of adjustments for the perfect suspension action. Lyrik Ultimate packs an orchestra of industry-leading tech like the ButterCups technology and a DebonAir+ air spring in a stout 35mm chassis. Now better than ever, Lyrik is ready to push your limits. FEATURES - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in the Signature colorway Heavy Meadow Green or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)
$1,054.00
- 35mm chassis at home on the trail - stiff, playful and light, really light - ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork’s bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included
$1,049.00
Ultra-versatile, super capable, lightweight on the scales, heavy on the attitude—this is Pike. Not afraid of the rooty chutes. Unintimidated by the calf-crushing climbs. We’ve updated our trail-capable legend with the new Charger 3.1 RC2 damper. Along with vibration-killing ButterCups, this damper offers better traction, comfort, and control. With more tunable range, Charger 3.1 enables riders to set up the perfect suspension action for their preferences. A fork designed to level up your trail game. Experience the legend. FEATURES - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butter-like small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in the Signature colorway Gloss Silver or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)
$989.00
The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Three on-the-fly compression damping positions: Open, Medium, Firm - Performance Series black-on-black graphics package
$968.00
Designed not only for the race down but the also ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control and precision. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance sunup to sundown. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper featuring independent high and low-speed compression adjust - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package
$914.00
This is the Pike DJ. It's a cousin to the award-winning Pike, which makes it look a lot like a trail fork — until you ride it. Pike DJ is built on a stout 35mm chassis and includes a custom-tuned Charger damper and specific Solo Air system designed for more bottom-out progression than you'll ever need because your trails eventually require some landings. - New graphics package for a fresh, premium look - Proven Charger damper with specific Dirt Jumping/Slopestyle tune - Specific Solo Air top cap for extra bottom-out progression - Accepts Bottomless Tokens to easily custom-tune the air spring performance to best match your own riding style and suspension preference
$896.00
- Performance-packed, featuring an updated 38mm chassis, now compatible with new Pressure Relief Valves. - 38mm chassis for increased stiffness and rider confidence - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - Compatible with new Pressure Relief Valves - Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride - Bolt-in torque cap adapters now included for the use with standard hub end caps
$799.99 - $849.99
Featuring 37mm stanchions, home mechanic-approved travel adjustability from 180mm to 140mm, and our easy-to-use VTT-6P damper, the Mezzer Expert is the smart choice for anyone looking to dive into the Enduro Fork market. Should you later decide you would like more adjustability from your fork, factory upgrades such as IRT and MC2 are available and can be easily installed in your own garage. At 2030g this fork is the second lightest option available within the Enduro fork market, second only to the Mezzer Pro of course. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring. - IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self-contained spacers. You'll never lose a volume spacer again. - VTT-6P damper provides 6 easy clicks to dial in your damping for all types of terrain. - Integrated fender can be installed/removed by three small screws threaded into the arch of the fork. - TSR (Trail Side Relief) valves on the back of the lower legs allow you to bleed off built-up air within the lower legs to keep things butter smooth between service intervals Product Details: - VTT-6P damper provides 6 clicks to tune damping for all types of terrain - 37mm stanchions, Reverse-Arch design, and Hexlock SL2 axle for the ultimate stiffness - IVA, Air Volume Adjustability by rearranging self-contained spacers - TSR, Trail Side Relief valves on the back of the lower legs allow air to be bled off if it builds up within the lower legs to keep things butter smooth between service intervals - Internally adjustable travel from 180mm to 140mm in 10mm increments with included spacers - 2.6" maximum tire width
$843.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise
$815.00
The ZEB Select is packed with performance in a stout 38mm chassis and features the updated DebonAir air spring with the trusted Charger RC damper. SKF wiper seals and Maxima Plush fluid reduce friction, silence noise, and provide all-around lasting performance anywhere you need it to be. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger RC damper features low-speed compression adjustment - Dual Position Air adjustment option to change the geometry of the bike for climbs and descents - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise
$799.99
Featuring 37mm stanchions, home mechanic-approved travel adjustability from 180mm to 140mm, and our easy-to-use VTT-6P damper, the Mezzer Expert is the smart choice for anyone looking to dive into the Enduro Fork market. Should you later decide you would like more adjustability from your fork, factory upgrades such as IRT and MC2 are available and can be easily installed in your own garage. At 2030g this fork is the second lightest option available within the Enduro fork market, second only to the Mezzer Pro of course. - Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring. - IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self-contained spacers. You'll never lose a volume spacer again. - Integrated fender can be installed/removed by three small screws threaded into the arch of the fork. - VTT-6P damper provides 6 clicks to tune damping for all types of terrain - 37mm stanchions, Reverse-Arch design, and Hexlock SL2 axle for the ultimate stiffness - TSR, Trail Side Relief valves on the back of the lower legs allow air to be bled off if it builds up within the lower legs to keep things butter smooth between service intervals - Internally adjustable travel from 180mm to 140mm in 10mm increments with included spacers - 2.6" maximum tire width
$790.00
- 35mm chassis at home on the trail - stiff, playful, and light, really light - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise
$779.00
Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers. - Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included) - Noise management system for near silent performance - Integrated air assist for progressivity and bottom-out control - External preload adjuster to dial-in sag and firmness off the top - Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers - Additional springs sold separately to fine-tune and adjust for rider preference - Rake: 44mm
$769.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package
$764.00
For all the ups, downs and to get you to everything in between. Lyrik Select combines an updated DebonAir air spring with the trusted Charger RC damper for unmatched trail control and precision. Maxima Plush fluid reduces friction, silences noise, and provides all-around lasting performance. Features: - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger RC damper featuring low speed compression adjust - Maxima Plush damping fluid reduces friction and silences damper noise
$729.00
The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standard. - Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end - Legendary Bomber durability with 36mm stanchions - Buttery and easy-to-use GRIP damper - Tapered steerer tube for maximum stiffness - Adapters available for 15 x 100mm axle - 1.5 Tapered steerer - Offset: 37mm
$713.00
The ZEB is built with a stout, 38mm chassis and features the updated DebonAir spring with the performance of the Charger R damper. SKF wiper seals and Maxima Plush fluid reduce friction, silence noise, and provide all-around lasting performance. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New, price point Charger R cartridge damper featuring an easy-to-adjust damper with just rebound adjustment - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise
$650.00
There is beauty in simplicity and it's hard to argue with the simplicity of an unsuspended mountain bike. Despite its uncomplicated nature, ENVE's rigid Mountain Fork is loaded with unique features such as a removable fender, disc brake hose clip, and reversible axle inserts to fine tune the rake of the fork to match your ride preference and application. - Material: Carbon Fiber - Steerer Tube Length: 300mm - Rake: 44, 52 Adjustable - Axle to Crown: 470mm - Brake: Disc - Max Rotor Size: 180mm - Max Tire Clearance: 3.4-inch - Crown Race Diameter: 1.5-inch - Torque Spec: Steer Tube: 5.5 Nm - Torque Spec: Axle: 8Nm - Weight: 711g (w/ fender), 686g (w/ clasps)
$625.00
A carbon fork designed for bikepacking and endless exploration. Experience easier carrying of all possible accessories for everything from overnight endeavors to epic self-supported excursions with the ENVE Adventure Fork. The ENVE Adventure fork provides a lighter weight option for bikepackers and frame builders, while still maintaining reliability and strength. The dynamo light and charger routing is an integrated and protected solution to self-supported bike riders' needs. Finally, the fork chip option gives builders versatility in the fork by adjusting the axle-to-crown for different bike geometries for alternative bikepacking methods. In a market that's filled with heavy steel fork options, the ENVE Adventure fork offers bikepackers an opportunity to lighten their overall bike load through our trusted carbon fiber fork expertise. - Three-Pack Accessory Mounts - Fender and Rack Mounts - Reversible Drop-Out Chips for Adjustable Axle-To-Crown and Rake - Internal Dynamo Routing for Lights and Electronics Charging - Axle Spacing 12 x 100mm - Compatible Rotor Sizes 140mm & 160mm - 700 x 50mm Tire Clearance
$612.00
One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible
$599.99
The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou-engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound, and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork. Key Features: - 27.5” is 20g less than the previous model. - Expert air allows for internal travel adjustments with no added parts. - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost-effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts. - Absolute Plus (ABS+) is a shim stack-based damper that features external incremental Low-Speed compression adjustment. - 27.5” 110-150mm, 29” 110-150mm. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance. - Expert air spring and lower weight brings top-level performance to a new price point.
$599.95
Tom Ritchey was riding off-road decades before gravel riding was ever a "thing," and the new WCS Carbon Cross Gravel Fork is the manifestation of the experiences enjoyed on all of those dirty rides mixed with the legendary engineering for which Ritchey is famous. Built from life and ready for your drop bar off-road adventures, this full monocoque carbon fork delivers precision and confidence while offering stability and comfort along some of the more rugged terrain you'll encounter. With logical features—like enough room tires up to 40mm wide, the ability to run 12 or 15mm thru-axles, and ability to run flat-mount disc brakes—the Ritchey WCS Cross Gravel Fork is ideal for long-distance gravel events, your local cyclocross series, spontaneous weekend adventures, and everything in between. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 47mm - Axle-Crown: 383mm - Rake/Offset: 47mm - Spacing: 53mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Weight: 430g (with uncut steerer / not including axle)
$599.00
The Firestarter Carbon Fork is Salsa's high-end, rigid bikepacking fork. This sure-tracking platform features a carbon structure and 15mm thru-axle design, and the Three-Pack mounts on the forward portion of each leg allow use of Salsa Anything Cages or extra water bottle cages. - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Weight: 620 g - Wheel Size: 29er, 29+, 700c - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3
$599.00
The Firestarter carbon fork is made from high-modulus carbon fiber, built for all-terrain riding. Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes. - High modulus carbon fiber construction - Tapered 1-1/8" to 1-1/2" steerer tube - 160mm minimum rotor size; 180mm maximum rotor size - Mid-blade mounts for low rider racks - Compatible with wheel sizes: 27.5+, 29", 29+, 700c - Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles - BOOST 110 x 15mm thru axle included - Front Axle Size: 15 x 135L, TP=1.5, TL=10 - Internal routing for 110 BOOST dynamo hubs
$589.95
The one-piece carbon monocoque WCS Carbon Disc Road Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, offering a comfortable yet lively riding experience. Built with High Modulus Fiber (HMF), this impeccable road fork offers superior strength and a superb road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers has been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types based on their specific properties to manage different load types as well as possible in the areas in which they occur—such as side load, torsion, and impact. The WCS Carbon Disc Road Fork features a 46mm rake and includes a compression plug. Welcoming flat-mount disc calipers, this fork also fits up to 30mm tires, depending on tire make and model. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 46mm - Axle-Crown: 371mm - Rake/Offset: 46mm - Spacing: 40mm - Minimum tire clearance: 4mm - Wheel compatibility: 700c - Weight: 390g (with uncut steerer / not including axle)
$579.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands – including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and features carbon dropouts and disc mount. - Blade: Carbon - Crown: Carbon - Steerer: Carbon - Steerer Length: 300mm - Steerer Diameter: Tapered 1-1/8 – 1.5-inch - Rake: 45mm - Blade Shape: Curved - Drop out: Carbon - Rotor size: 140mm (160 w/ adapter) - Crown Diameter: 45mm - Integrated 45-degree crown race - Axle-to-Crown: 395mm - Finish: Matte UD carbon - Weight: 440g (w/ uncut steerer) - Compression plug included
$579.00
With bigger bikes come bigger demands. The new Domain takes cues from ZEB, our enduro specialist fork with serious credentials. Domain offers a new burly 38mm chassis, short fender compatibility, and a confidence-inspiring DebonAir air spring matched with a reliable Motion Control RC damper. We even brought the performance of Maxima Plush damping fluid along for the ride. Nothing goes as big as Domain does in value and performance. - 38mm chassis for increased stiffness and rider confidence - Motion Control RC damper featuring low speed compression adjust with externally adjustable dual-flow rebound - Highly tunable DebonAir air spring offers a consistent feel throughout the travel - Maxima Plush damping fluid reduces friction and quiets damper noise - Short fender compatible. RockShox premium fender sold separately. AM Variants include RockShox zip-tie fender - Fits tires up to 2.8" without fenders—use of any fender may reduce tire clearance
$569.00
The Kingpin Deluxe fork is perfect for fat bike expeditions, keeping you nimble even when fully loaded. Dual Three-Pack mounts on each leg let you attach water bottles or Anything Cages, and mid-blade mounts fit low rider racks for panniers. Or, ditch the gear and hit the trails with an ultra-light and responsive fork. - High modulus carbon fiber construction - Tapered 1-1/8" to 1-1/2" steerer tube - 160 minimum rotor size; 203mm maximum rotor size - Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles - Mid-blade mounts for low rider racks - Internal routing for 150mm spaced dynamo hubs - Maximum Tire / Rim sizes: 26 x 5", 27.5 x 4.0", 29 x 3.0" - 150 x 15 mm thru axle included - Front Axle Size: 15 x 198L, TP=1.5, TL=9
$569.00
The Waxwing Deluxe fork is designed to thrive on gravel. Its carbon-fiber construction is lightweight and soaks up micro-impacts on rough roads. The 12 x 100mm thru-axle keeps Waxwing stiff for steady tracking and responsiveness when dodging ruts, potholes, and road debris really matters. Waxwing Deluxe is compatible with both 700c and 650B wheels so you run your preferred size. Three-Pack mounts, mid-blade low-rider rack mounts, fender mounts, and internal dynamo hub cable routing add form and function. The Waxwing Deluxe fork is standard equipment on the 2019–2020 Warbird, and is available in a version painted to match the Warbird frameset. - Thru-Axle included - Axle-to-Crown Length: 405mm - Brake Type: Disc, flat mount, 160mm maximum rotor size, 42mm bolt length - Color: Black - S.H.I.S. Crown Race: 40mm, 36°, integrated crown race - Fork Rake: 50mm - Front Axle Type: 12mm thru-axle - Front Axle Size: 12 x 120mm, TP = 1.5, TL= 12mm - Front Hub Spacing: 100mm - Material: High-modulus carbon fiber - S.H.I.S. Clamp Diameter: 28.6mm - Steerer Tube Length: 350mm - Steerer Type: 1-1/8" to 1-1/2" tapered - Weight: 520g - Max tire size: 700c x 45mm or 650B x 51mm
$565.00
Sleek and serviceable, the Whisky No.9 CXLR Fork is a tough, lightweight upgrade for gravel riders and bikepackers looking to carry a little cargo up front. Sporting 3-pack mounts, mid-blade mounts for low-rider rack compatibility, and fender eyelets on the outside of the fork legs for easy mounting, the CXLR keeps everything clean and tidy with internal routing for brakes and dynamo hubs. Additional features like flat-mount brakes, 12mm thru-axles, and ample tire clearance make this standout piece perfect for your packing setup. - 12mm thru-axle, 100mm spacing - 700c x 42mm or 650b x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24 - Includes thru-axle and Whisky Parts Co. compression plug - Brake Mount: Flat Mount 140 - Material: Carbon - Weight: 526g - Steerer Type: Tapered - Offset/Rake: 45 - Steerer Tube Length: 350mm - Axle to Crown Length: 395mm - S.H.I.S. Crown Race Diameter: 40 - S.H.I.S. Stem Clamp Diameter: 28.6 - Fork Minimum Rotor Size: 140 - Fork Maximum Rotor Size: 160
$565.00
The Whisky No.9 MCX “monster cross” fork brings extra-wide tires to your drop-bar bike. How wide? The MCX accommodates tires up to 700c x 51mm or 650b x 61mm (that’s 2.4-inches). A relatively short 415mm axle-to-crown minimizes the geometry effects of a larger fork, and a 51mm offset improves toe clearance with large tires or fenders. The design draws from our CX forks, with lightweight carbon construction, a 12mm thru axle, and flat-mount brakes. Three-Pack mounts, dynamo cable routing, and fender mounts (700c x 45mm tire clearance with fender) add versatility for bikepackers and gravel riders. - 12 x 100mm thru-axle - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700c x 51mm or 650b x 61 mm max tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru axle and Whisky Parts Co. compression plug
$550.00
A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience. - Material: Carbon - Weight: 520g - Steer Tube Length: 350mm - Rake: 50mm - Axle To Crown: 395mm - Max Rotor Size: 140mm – 160mm - Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch - Crown Race Diameter: 1.5-inch - Torque Spec - Steer Tube: 5.5Nm - Torque Spec - Axle: 8Nm
$549.00
Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible
$540.00
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on. - Post style brake mount - DT RWS Axle included - UD full carbon construction - Axle to Crown Length: 480mm - Brake Mount: Post Mount 160mm - Crown Race: 40 - Front Axle: 15 x 150mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: 1-1/8 – 1-1/2-inch tapered - Weight: 750 grams - Wheel Size: 26-inch
$537.00
Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Welcome Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range. Features - New graphics are easy to read and make a fresh impact - Specifically tuned for smaller riders - External rebound adjustment - Offset: 40mm
$537.00
Revelation is all grown up and ready to explore, wherever the trail may turn. Value-packed, the Revelation features an updated DebonAir spring paired with a Motion Control damper and 35mm Fast Black upper tubes. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Motion Control damping featuring low-speed compression adjustment to firm - Chassis is derived from the renowned Pike fork - New graphics package for a fresh, premium look
$526.00
Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Hello Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range. - New graphics are easy to read and make a fresh impact - Specifically tuned for smaller riders - External rebound adjustment
$525.00
The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 42mm max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru-axle and Whisky Parts Co. compression plug
$525.00
The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat-mount disc brakes - Fender eyelets on outside of fork leg for easy mounting - 700c x 42mm or 650B x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches - Includes thru-axle and Whisky Parts Co. compression plug
$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
$525.00
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance
$525.00
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance. - 1-1/4-inch Tapered steerer tube - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700 x 30c max recommended tire size - Includes thru axle and Whisky Parts Co. compression plug
$509.00
One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible
$499.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions
$483.00
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm
$450.00 - $483.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring
$450.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
$449.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Canty Fork is designed for the rigors of cyclocross and those who demand traditional canti brakes. Decades of experience between the course tape and building the bikes and components designed to win inform the performance and design details of this fork. It employs a monocoque construction, and it's compatible with standard and integrated headsets. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - Steerer length: 300mm - Fork length: 395mm - Rake/Offset: 45mm - Crown diameter: 45mm - Spacing: 54mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Weight: 448g (with uncut steerer / not including axle)
Page 1 of 2 Next page