Filter By:
Parts & Accessories
Make sure you know where you're going when you mount Ortlieb's Map Case for the Ultimate5 (sold separately) on your handlebars. It mounts seamlessly to the Ultimate5's snap attachment points, a tight closure keeps weather out, and the tear-resistant fabric provides longevity.
Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack.
- 2 inserts measuring 8 mm
- 2 inserts measuring 11 mm
For all models, including the Back-Roller and Sport-Roller, with Stealth buckles
Need to replace a pair of broken buckle?
- 2 plastic buckles (male and female ends, 25 mm, black)
For all models with the QL2.1 system.
Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm).
DETAILS (PER PANNIER):
- 1 pair of 8-mm inserts
- 1 pair of 10-mm inserts
- 1 pair of 12-mm inserts
To avoid chafe marks on the handlebars, you can simply re-order these foam pads as a set of 5.
CONTENT:
- 5x distance pads, grey
For all models with the QL1 system
Is the bracket on your bike pannier with the QL1 mounting system broken? Simply replace the bracket to get your faithful pannier back in action.
- 1 QL1 bracket (4-hole) with mounting screws
- Length 31cm
- Hole spacing 11,5 - 6,5 - 11,5cm
For all models with the QL2.1 system.
Replace a lost or worn semi-elliptical bracket with a new bracket.
DETAILS:
- 1 semi-elliptical bracket and mounting screws for the QL2.1 system
For all models with the QL2.1 system.
Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? No problem. The screw set will help you make sure you'll be able to continue your tour with no loss of waterproof performance even if a few screws go missing.
DETAILS:
- 10 screws
- 10 nuts
Metric screws and plastic screws for mounting the upper QL2.1 rail. For all models with the QL2.1 system.
CONTENT (FOR ONE PAIR OF BAGS):
- 4x metric screws incl. nut washers
- 2x self-tapping screws incl. plastic washers
Spare part for replacing a defective 3-hole QL2.1 mounting rail with a length of 23.5 cm.
Has the QL2.1 mounting rail on your rear pannier finally given in? This spare part allows you to replace it. The rail is 23.5 cm long and has 3 holes with an 11 cm spacing. Fastening screws and nuts are included.
Ortlieb's Ultimate5 Mounting Set is the piece that holds the bag to the bar. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate5 bag (sold separately).
Page 1 of 1