Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Fenders

SKS B60 Commuter II
$39.99
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
SKS Fatboard Fender Set
$59.99
The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.
SKS Mud-X
$9.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
SKS P35 Chromoplastic Longboard
$54.99
End wet feet forever! SKS Longboard are one of the longest and best coverage fender on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety. - 700c x 20-28
SKS P45 Chromoplastic Longboard
$56.99
End wet feet forever! SKS Longboard are one of the longest and best coverage fender on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety. - 700c x 28–37
SKS P50 Chromoplastic Longboard
$64.99
End wet feet forever! SKS Longboard are one of the longest and best coverage fenders on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety. - 700c x 38–45
SKS P55 Chromoplastic Longboard
$64.99
End wet feet forever! SKS Longboard are one of the longest and best coverage fenders on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety. - 26 x 1.6–2.1
SKS P65 Chromoplastic Longboard
$67.99
End wet feet forever! SKS Longboard are one of the longest and best coverage fenders on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety. - 26 x 2.1–2.35
SKS Raceblade Pro XL Fender Set
$59.99 - $64.99
The ultimate clip-on mudguard set for road and cyclocross bikes for tire widths between 25 and 32mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Its superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Includes adhesive protection kit to avoid damaging the paintwork. Disc brake compatible: Please be mindful of the brake wire.
SKS S-Blade
$21.99
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.
SKS S-Board Front Fender
$23.99
- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.
SKS S-Guard
$9.99
The S-Guard is a lightweight, injection molded seat mounted fender for mountain or road use. Fast to fit, the S-Guard can also be zip-tied onto the saddle rails for extra security (zip tie is not included). Made of super soft material it fits nearly every saddle. - Mounts to saddle rails via cutouts that can be supplemented with zip ties - Appropriate for both mountain and road use - Made in Germany - 24g
SKS Speedrocker Fender Set
$79.99
The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers. - Rear fender expands for custom fit - Rubber fasteners mount to a variety of frame styles
SKS X-Blade 26/27.5-inch
$32.99
The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 26-inch and 27.5-inch wheel compatible
SKS X-Long Spoiler
$9.99
The X-Long Spoiler is designed to add extra coverage to SKS fenders. - Compatible with 45mm versions of the Chromoplastic, Commuter II, Long Board and Raceblade fender models - Easily mounted by consumer with included hardware - Sold as Each
SKS X-Tra Dry
$17.99 - $19.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
SKS X-Tra Dry XL
$21.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.
Problem Solvers Fender Flute
$20.00
The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel. - Especially helpful for fender mounting on suspension-corrected forks - Threaded M6 holes at 10mm intervals for fine-tuning fit - Bolts and lock washers included
Portland Design Works Mud Shovel 6.5 Fat Front Fender
$18.00
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
Portland Design Works Mud Shovel 6.5 Fat Rear Fender
$24.00 - $25.00
These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle
Planet Bike Cascadia ALX Fenders
$89.99
- Rugged 6061 aluminum construction is corrosion resistant - 100mm mudflaps provide ultimate coverage and are double-riveted for durability - Hardware is all stainless-steel and pre-installed for hassle-free mounting - V-stays for added stability - Disc brake compatible - 50mm width - Release Tabs on front fender for added safety - Meets EN test standards
Giant Speedshield Defy/Avail Aluxx Fender
$50.00
- Designed for compatibility with the Giant Defy Aluxx and Liv Avail Aluxx bikes - Quickly adjust gap between fender and tire - Tool-Free universal mounting system - Full coverage protection
Wald Balloon 962 Fender Set
$39.99 - $43.99
These steel fenders offer tire coverage that is durable with a timeless aesthetic. - The crescent full-coverage design offers a closer fit around the tire - Made in the USA
WTB Mud Guard
$16.95
Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.
Topeak D-Flash DT Fender
$15.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz
No Image
$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)
Topeak D-Flash S Fender
$14.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz
Topeak D-Flash ST Fender
$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 57.5cm / 22.6" (in length) - Weight: 75g / 2.65
Topeak DeFender FX
$15.95
Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.
Topeak DeFender FX 279er
$22.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube - Two tone injected high impact resistant plastic - Weight: 233 grams - Rear angle adjustable - 73x21x11cm/28.7x8.3x4.3-inch
Page 1 of 5 Next page