Accessories

XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.

- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors

- Steel wheels - For riders up to 100lbs - Fits 12" - 20" wheel bikes

Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.

Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.

Wald's 742 training wheels feature three slots on the brace arm allowing this wheel set to mount on most single speed bicycles with 16- to 26-inch wheels. The brace arms are designed to fit rear frames tubes up to .75 inches in diameter. This model is intended for use by riders weighing up to 125 pounds. - The Wald Training Wheels fit 16- to 26-inch bicycles. - The Wald Training Wheels support riders up to 125 pounds.

- Pedal thread inserts are used to replace damaged threads in cranks

For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.

If your fork has inside and outside eyelets, then the DUO is your right choice. Just as the TARA, DUO tolerates extreme loads and almost all panniers. It also ­features a longitudinal hole for optimal fit and increased flexibility. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer, or by the bicycle manufacturer for mounting a carrier. There must be no crimping. - Material: 25CrMo4 - Size: 26" | 28" - Weight: 560 g | 19.8 oz - Loading Capacity: 15 kg | 33.1 lbs - Diameter: 14 / 10 mm | 0.6 / 0.4 in

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.

TorqSocket kit works with any mini-tool containing a 5 mm Allen wrench (or single 5 mm Allen key). Applies correct torque on component bolts for safety and to prevent damage to carbon parts. - Includes 3,4.5mm hex bits, T20 & 25 Torx - Packaged in own carrying case - Material: Hardened steel - Size: 2.1" x 2" x 0.9" - Weight: 75g

Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.

Like bringing your floor pump on the trail. High-volume barrel fills fat tires fast while fold-out foot pad and flexible hose make inflation a snap. - Head: Presta/ Schrader/ Dunlop Valves - Barrel: Butted Aluminum - Thumb Lock: Plastic - Handle: T-Type Plastic/Kraton - Capacity: 160 psi / 11 bar - Added Features: Fold-out Foot Pad - Flexible Hose - Centerline Mount Bracket - Size (L x W x H): 35 x 5.8 x 3 cm - 13.8" x 2.3" x 1.2' - Weight: 250g / 8.80 oz

Topeak's Road Morph G is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Road Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose with built-in gauge and a T-handle. Of course, it fits Presta and Schrader valves and a frame mount is included, too.

- This one size fits all tubular aluminum rear rack is designed for Fat bikes with disc brakes - Adjustable rack legs fit most 24" & 26" Fat bikes - Integrated side bar provides a lower pannier attachment for more cargo on top of the rack - The MTX 2.0 QuickTrack plate is compatible with any Topeak MTX trunk bag, MTX rear basket, and most other rack packs and panniers on the market - Not compatible with asymmetric rear stay design Fat bike frames - Includes extra-long mounting bracket and rear light mount - Max weight 55lbs - 16.9 x 13.4 x 11.4" - 2.79lbs

The Vero takes all the style and performance of the best-selling Veloce and packs it into a smaller frame. Perfect for those with smaller faces, the Vero is great for taking on your run, cycling through town, and chasing personal records. - All Tifosi lenses provide 100% protection from harmful UVA and UVB rays and are constructed from scratch-resistant, shatterproof polycarbonate - Grilamid TR-90 frame is made of an incredibly light and durable nylon material that resists chemical and UV damage - Adjustable, hydrophilic rubber nose and ear pieces allow for a custom fit, limiting slippage and increasing comfort - Optically decentered lenses eliminate distortion and prevent unwanted magnification - Vented lenses increase airflow to prevent fogging and help keep you cool - Tifosi's proprietary glare guard lens coating reduces eye strain - Case included

Step up to Tifosi's Podium XCs and enjoy the amazing view! With an open, frameless design and a large, impact-resistant, polycarbonate lens, these sturdy specs offer a wide, unobstructed field of vision and maximum protection from debris. These stylish, lightweight glasses boast Tifosi's exceptionally tough Grilamid frames and a stunning, distortion-free Clarion mirrored lens that prevents water spots. The included 3 interchangeable lenses let you tune your glasses for different light conditions. And, you'll love the hydrophilic rubber temples and nose pads that adjust in all directions and grip better when wet for a comfortable fit that stays put.

Surly Front Rack Hardware

Surly made these handy plates for use with either the Long Haul or Disc Trucker frames, and only the Long Haul and Disc Trucker frames. They are to be used with a bicycle kickstand to keep your bicycle upright while not moving as if by magic. The plates consist of two halves that, when clamped on your frame in conjunction with a kickstand, protect your chainstays from hamfisting by sandwiching the frame between the plates. Have you ever eaten a hamfist sandwich? They taste terrible, so avoid them like the plague. - Compatible with 2019 and older Long Haul and Disc Trucker frames

All the hardware for the lower portion of your Surly rear rack. Stainless steel.

This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.

Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag

Let everyone know your coming with Sunlite's Ding Dong Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

Triangular frame bag in the shape and design of a cheesy slice of pepperoni pizza. Perfect for a phone, snacks, tools or other small items - Mount: Adjustable Straps - Size: 10.8x1.92x7.48" - Volume: 63.55 c.i.

Turn your bike into an errand-running, cargo-hauling machine with Sunlite's Folding Basket. This sturdy basket attaches to your rear rack in a snap and folds out of the way when not in use.

Sunlite's Gold Tec Disc Rack fits almost any disc brake-equipped bike with wheel sizes of 26-inch, 27-inch, and 700c. Made from lightweight tubular aluminum, the Disc Rack is durable enough for daily commutes and light enough for long tours. The top deck has a capacity of up to 50 pounds and side struts support rear panniers.

Keep both your bike and yourself clean and dry with Sunlite's Cruiser Full Fender Set. These fenders offer full coverage and a cool look for your cruiser bike. The stays and fenders are steel so they're durable.

- 5 DART plugs for use with the Stan's NoTubes DART tool

Perfectly utilitarian, but also easier on the eyes than most racks thanks to its curving lines. - Tubular aluminum construction - Bracket for rear light - All hardware included - Rack measures 36x14x36 - 25kg. weight limit - Available in matte silver and black Note the current design of the upper hardware is better suited to attach to frame braze-ons that are embedded in the side of the seatstays and less friendly to braze-ons that sit on top of the seatstays and align perpendicular to the bike.

Wireless mounting bracket for 2012, 2009 STS & 2006 DTS model computers. Handlebar or stem mount. Compatible models: BC 1106 DTS BC 1606L DTS BC1706HR DTS BC 2006 MHR DTS BC 1009 STS BC 1609 STS BC 8.12 ATS BC 12.12 STS BC 14.12 STS BC 16.12 STS Baseline 1200 plus

Our top-selling wireless sport headphones formerly known as Aeropex now come with new packaging, a quick-charge feature, and a new name. OpenRun are our lightest headphones to date and are engineered with outstanding sound, a long-lasting battery, and Quick Charge to keep you aware and motivated while you power through any workout. - 8th Generation Bone Conduction Technology - IP67 Waterproof (Not for swimming)  - Lightweight + Comfortable - 8-Hour Battery Life + Quick Charge

Shimano Genuine disc brake bleed Funnel unit for ST type Road brake lever (M7 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below

Shimano Genuine disc brake bleed Funnel unit for BL type MTB brake lever (M5 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below

Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams

Replacement Part – Universal Rack Mount - Fits all Serfas tail lights (Except TST-70, TST-100, & TBT-50R) - Bolts to rack for easy removal of tail light

Replacement Part – Multi Sport Headlight & Tail Light Bracket - Works for both headlights & tail lights - Great for helmet application - 3 strap sizes allows fitting from 20mm to over 100mm - Adjusts to fit aero & round seat posts & handlebars - For lights up to 120 grams in weight - Cannot be used with: TST-70, TST-100, TST-150, TBT-50R, TBT-120F, USL-200, USL-250, USL-450, USL-500

Use to securely mount serfas tail lights to any compatible rear rack. Serfas Tail Light Compatibility: - TBT-50R Thunderbolt 2.0 - TST-70 Scorpius 70 - TST-100 Scorpius 100 - TST-130 Scorpius 130 - TST-300 Scorpius 300 - TSV-130 Vulcan 130 - TSV-350 Vulcan 350

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

Serfas' TL-411 LED Taillight boasts 4 ultra-bright LEDs for excellent visibility. It has flashing and steady modes, runs for up to 70 hours, and comes with 2 AAA batteries.

Replacement Part – Headlight Bracket - Fits all Serfas headlights - Long silicone strap allows endless mounting options - No tools needed - Cannot be used with: TST-70, TST-100, TST-150 & TBT-50R

FEATURES - Perfect Starter Light - AAA Battery Operation - Now Includes Universal Handlebar Bracket SPECS - Modes: High (150 Lumens): 30 hrs & Flashing: 85 hrs - Weight: 133 Grams with Bracket - Battery: Includes: 3 “AAA”

Gear up and be seen with the compact and highly visible Serfas Phoenix integrated USB rechargeable Helmet Tail Light. It's simple to install and remove with the helmet mount system and features a magnetic retention system that safely breaks away during a crash. Motorists will appreciate your improved visibility and your mother will thank you for playing it safe. - Ultra Bright Red LED (15 Lumens Max. Output) - Integrated USB Rechargeable Charge Port w/ Charge Indicator Light - Last Mode Memory (Light Remains In Last Mode Used At Power On) - Weight: 17g w/ Bracket - Battery: 250mAh Lithium Polymer - Light Body Dimensions: 32 x 55 x 18mm Modes: - Solid: High – 4 Hours (6 Lumens) / Low – 8 Hours (3 Lumens) - Flash: Daytime High Flash – 30 Hours (15 Lumens) / High Flash – 40 Hours (8 Lumens) / Low Flash – 70 Hours (3 Lumens)

Quick Overview - 270 Degree High Visibility Design - Highly Adjustable Mounting System - 30 Lumens - Daytime Flash Mode - 5 Modes: 2 Solid / 3 Flash - Micro USB Rechargeable Limited Lifetime Warranty Serfas® warrants to the original purchaser that the product is free of defects in material, construction, and/or workmanship for the lifetime of the product. Battery Warranty – One Year Coverage Serfas® batteries are covered by a 1 year warranty from the original date of purchase. Features: - 30 Lumen Max Output - 4 LED Chip - Finned Lens Design Provides 270 Degree Visibility - Blue LED Charge Indicator - Daytime Flash Mode - Up To 34 Hours Runtime - Micro USB Rechargeable Specs: Solid Modes: - High – 15 Lumens / 2 hrs - Low – 6 Lumens / 6 hrs Flash Modes: - Daytime Flash – 30 Lumens / 34 hrs - High Flash – 15 Lumens / 19 hrs - Low Flash – 6 Lumens / 34 hrs - Weight: 26 Grams w/ Bracket Size: - Overall Height – 56.3mm (2.22?) - Main Cylindrical Body Width – 21.7mm (0.86?) - Widest Fin Width – 32.3mm (1.27?) - Charge Time: 2 hrs Using 500mA USB Wall Charger Product Package Contents: - (1) UTM-30 Cosmo 30 Lumen Tail Light - (1) Micro USB Charging Cable - (3 Sizes) Rubber Mounting Inserts - (3 Sizes) Rubber O-Ring Mounting Straps *Please note, flickering or pulsating observed in video is due to, “strobe effect,” a video capture phenomenon and is not representative of what is seen by the naked eye (steady shining light)*

Ready to hit the trail, tear up the road, and even play at the beach? Spring into motion with Serfas' lightweight and form-fitting Traitor glasses. They deliver scratch-resistant lenses, strong impact resistance, a no-slip nose bridge, and 100% UVA/UVB protection. The sleek, wrap-around frames protect you from the sun, wind, and glare, too.

Largest Easy-Touch Button In The Industry Keep focused on the trail instead of hunting for buttons. Designed for simplified no-look use, especially when helmet mounted, with easy touch oversized five-point button sensor and LED backlit battery level meter. - USB-C Charging - Go-Pro® and Bar Bracket Included. Rugged looks with impressive light output and smart features, our all new completely redesigned Serfas© True Series MTB headlights will illuminate your path. The Serfas© True 1300 MTB features 1300 lumens of crystal clear bright night time illumination to make out every turn of the trail and 1300 lumens in Flash mode to make sure all eyes are on you. A smart grippy extra large power button with LED backlit battery level indicator ensures surefire operation and convenient battery monitoring so there are no unwelcome surprises on the trail. Go-Pro® and Bar Bracket Included. TSL Headlight Models w/ Button Lock – True Series Headlight User Manual Limited Lifetime Warranty Serfas® warrants to the original purchaser that the product is free of defects in material, construction, and/or workmanship for the lifetime of the product. Battery Warranty – One Year Coverage Serfas® batteries are covered by a 1 year warranty from the original date of purchase. Features: - 1300 Lumen Output - Oversize Easy-Touch Power/Mode Button - Backlit LED Battery Level Indicator - USB-C Charge Port w/ 1A Fast Charging - Last Mode Memory (In Solid Mode) - Go-Pro® and Bar Bracket Included - Removable Li-Ion Battery - Convenient Magnetic Battery Removal - No Tools Required Installation - IPX6 Water Resistance Rating Specs: Solid Mode: - High 1300 Lumens – 1.5 hrs - Medium 650 Lumens – 3.25 hrs - Low 320 Lumens – 7 hrs Flash Mode: - Daytime Flash 1300 Lumens – 49 hrs - Low Flash 190 Lumens – 51 hrs Weight : 128 Grams w/ Bracket Battery: 1-Cell Li-Ion, 3350 mAh Charge Time: 4.5 hrs (Using 2A USB Wall Charger) Color: Black *USB Charging: To ensure stable charging please be sure the USB-C male connection is fully and firmly clicked into place in the headlight's USB-C female charge receptacle to ensure a properly secured connection (an audible click will not always be heard). The integrated headlight battery charge level indicator will display five solidly illuminated blue LED dots when full charge is achieved.

The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground

Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season. Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike. Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Mag+ comes with convenient, adjustable handlebar-mounted shifter. - Compatible with Zwift and other indoor cycling apps

If you’re looking for a car rack that will haul your favorite 2-wheeled possessions with swagger and security, the Bones Hitch 3-bike has you covered. With arching lines and robust, American-made materials this hitch rack can be summarized in two words: beautiful simplicity. Weighing in at only 16 pounds, this 3-bike hitch rack is a full 25% lighter than similar racks—et just as strong. With integrated anti-sways and hold downs, the Bones Hitch is a fully functional piece of art. - Carries 3 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 16 pounds. - Made in Madison, WI.

Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps

A Killer Training Combo What happens when you pair a speed sensor with the #1 selling bike trainer in the USA? You get a combo that’s ready for any virtual—or non-virtual—training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Rouvy and Zwift, without a traditional smart trainer. Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid2 trainer with our innovative club knob, connect to your virtual training app of choice via Bluetooth or ANT+, and voilà! - you’re ready to sweat. Product Features - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Included speed sensor connects you with Rouvy, Zwift and other indoor cycling apps. - ANT+ USB and BlueGiga USB sold separately. - Includes one month subscription to Rouvy virtual training app In the box: - Fluid² Smart Equipped Bike Trainer - Dual-band magnetless speed sensor - Fluid² is the best-selling trainer in the USA. - Fluid resistance unit creates optimal road-like feel. - Fluid resistance unit provides a quiet and consistent ride. - Noise level at 20 mph is super quiet 64-68 decibels. - Large, individually precision-balanced flywheel allows for improved road-like feel. - Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Comes on the foldable Classic frame with spring loaded, bolt-action lever. - Precision-machined alloy roller reduces tire wear and slippage. - Features clutch knob for perfect roller-to-tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes – up to a 2.0 tire. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm. - Trainer tire recommended. - Compatible with indoor cycling apps. - Trainer is tested to the combined weight (rider and bike) of 300 lbs. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes. - ANT+ USB and BlueGiga USB sold separately. - Formerly branded as CycleOps Fluid² Smart Equipped

Reliable. Durable. Quieter Than Ever Before. When it comes to indoor bike trainers, the most frequently asked question is: how quiet is it? Taking this to heart, our Madison, Wisconsin-based team put this query under the microscope and set a goal to build a trainer so quiet, that the only sound is that of your drive train. The result? A direct drive smart trainer that touts a sound specification of 59 decibels at 20 mph. In other words, the H3 is five times quieter than previous generations, making it the quietest smart trainer to ever leave our doors. Following the Saris direct drive smart trainer legacy, the H3 features the same reliably and durability as its predecessors. Each H3 is made from cast and machined aluminum sourced from America’s heartland. Encased inside are components meticulously calibrated to measure power, speed and cadence, as well as a precision-balanced flywheel - all built to handle 2000 watts and replicate a 20% climbing grade. Tested to withstand heavy training, the H3’s internal cooling system will keep the electromagnetic resistance system working – and accurate – long after your legs have given out. - Quieter Than Ever: all new drive system shaves decibels off previous generations. - Precise Training: +/- 2% power accuracy. - Controlled and Consistent: electromagnetic resistance provides a measured workout every time. - Direct Drive Design: widest bike compatibility and eliminates wheel slips. - No External Sensors Required: measures speed, cadence and power. - Seamless Integration: connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards. - Zwift certified. Specs - Noise level: 59 decibels at 20 mph - Power measurement accuracy: +/- 2% - Maximum power output: 2000 watts at 20 mph - Simulates a 20% climbing grade - Fast response electromagnetic resistance - Measures speed, cadence and power – no external sensors needed - 20 lb precision balanced flywheel - Integrated dual ANT+ FE-C and Bluetooth FTMS standards - Built-in front wheel block - Integrated carrying handle - Compatible with Shimano 8-11 speed cassettes - XD/XDR freehubs sold separately (link) - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Compatible with a wide variety of devices and indoor cycling applications, including Rouvy, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2 (link). - LED indicator lights communicate connectivity and more. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Internal cooling technology ensures accurate ride data even during the hardest of workouts. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates and calibration via the Saris app (link to firmware page) - Maximum weight (rider and bike): 300 lbs. - Dimensions when Open L*H*W: 31x18.5x19.5 inches (787.4x469.9x495.3 mm). - Dimensions when Closed L*H*W: 8.5x18.5x19.5 inches (76.2x469.9x495.3 mm). - Weight: 47 lb. (21.3 kg). - Cassette sold separately.

All-in-one H3 package with everything you need to connect to Zwift and Rouvy. Everything You Need to Train Smarter, Harder & Quieter Joining the virtual training world can be overwhelming. That’s why we’ve built this do-it-all package to take all the guesswork so you can simply connect and ride. With this bundle your H3 smart direct drive trainer will come with a pre-installed 11-speed cassette, as well as all the accessories needed to pair to your favorite indoor cycling app. Unsure which app is right for you? We’ve got you covered there too with the included 1-month subscription to Zwift, ROUVY, and TrainerRoad. And when it comes to the trainer itself, the H3 features the same reliability and durability as its predecessors – only quieter. At 20 mph and just 59 decibels, the H3 is five times quieter than previous generations, making it the quietest smart trainer to ever leave our doors. Encased inside are components meticulously calibrated to measure power, speed and cadence, as well as a precision-balanced flywheel - all built to handle 2000 watts and replicate a 20% climbing grade. Tested to withstand heavy training, the H3’s internal cooling system will keep the electromagnetic resistance system working – and accurate – long after your legs have given out. Product Features - All-in-One: includes pre-installed 11-speed cassette, ANT+ USB dongle, USB extension cable, sweat guard and 1-month subscription to Zwift, ROUVY, and TrainerRoad. - Quieter Than Ever: all new drive system shaves decibels off previous generations. - Precise Training: +/- 2% power accuracy. - Controlled and Consistent: electromagnetic resistance provides a measured workout every time. - Direct Drive Design: widest bike compatibility and eliminates wheel slips. - No External Sensors Required: measures speed, cadence and power. - Seamless Integration: connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards. - Zwift certified.

Salsa's Post-Lock is a rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Stainless steel pivot and bolt - Available for 27.2 and 31.6mm diameter seatposts - Black anodized with laser-etched logo - 44g for a 31.6mm collar - Not for use on carbon seatposts - Note: Post-Locks do not have a lip like Salsa's Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

The X-Long Spoiler is designed to add extra coverage to SKS fenders. - Compatible with 45mm versions of the Chromoplastic, Commuter II, Long Board and Raceblade fender models - Easily mounted by consumer with included hardware - Sold as Each

This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.

- Pair of Velcro attached bosses - Mount a water bottle cage or pump mount on any part of your frame

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.